Yato 36980 - HAND CUTTING SYSTEM WITH CONNECTABLE GUIDE - Op to max 320Ccm
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-7 työpäivää. Lisätietoja

Kuljetuksen hinta 151,20 Kuormalavatoimitus katutasolle (arkisin 8:00-16:00)
– Takaraja klo 15.00 toimituksen lähtöön samana päivänä

Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten: Tallenna
EUR 197,47
ilman ALV 157,35
Kokonaishinta sis. toimitus 348,67
Cutting machine for ceramic plates with a length of up to about 320 cm. The set includes:

three rails - guides made of aluminum
four mounting suction cups that are connectors of the rails
one nó¿ on four rollers to guide along the guide.
The set includes hand pliers for breaking the notched plate and a wide handle for breaking larger sections of the plate. The set is packaged in a bag - a case made of thick nylon.

The cutting element is a 22 mm diameter ball-bearing forked kóblade. It can be pressed by the operator against the material while cutting. The cutter is designed for cutting large ceramic tiles with a thickness of 3 to 8 mm. Maximum cutting length of about 320 cm.

Use
depending on the size of the slab to be cut, we mount one, two or a combination of three guides on the surface of the slab.
to the guide mounted on the suction cups, we attach the wózek with the cutting unit
sliding it along the guide, we press with sensitivity to the surface of the plate obtaining the required cut
breaking is done with the included pliers or breaker