0,00
(toimituskulut: 0,00)
Smartwares 8711658427560, Hiilimonoksidi (CO), Koti, Office, Langaton, 85 dB, 10 vuosi/vuosia, CE
Tuotenumero: [8310363] | Valmistaja: Smartwares | Mallinum: FGA-13721 | EAN: 8711658427560
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-6 työpäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 25,10 |
EUR
46,87
ilman ALV 37,35
Kokonaishinta sis. toimitus
56,91
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Make sure you get warned in time when the carbon monoxide concentration is too high at home with the Smartwares FGA-13721 Carbon monoxide alarm. The loud alarm of 85 dB alerts you and gives you time to take safety measures to prevent getting a carbon monoxide poisoning.
Carbon monoxide, a lethal intruder within your home
In winter time, people tend to cosy up on the couch with the heating on. Especially than, carbon monoxide is lurking around the corner. When the heating sources are not properly maintained, carbon monoxide can be released. Carbon monoxide is a lethal gas, which is not detectable with our senses. Therefore, it is of the upmost importance to have one or more alarms installed, to make sure you are warned in time.
Loud and clear alarm
The Smartwares RM380 Carbon monoxide alarm has a loud and clear alarm of 85 dB that goes off when the allowed carbon monoxide concentration is exceeded. The alarm can be used in spaces with a surface from 20 m² up to 40 m². The sensor has a 10 years lifetime and comes with batteries. You will hear a short beep if the battery is running low, this way you get alerted when you need to replace the battery.
Easy installation
The carbon monoxide detector functions optimally when it is suspended from the ceiling and at least 1.85 meters from a combustion device. An ideal place to hang the detector is for example near the boiler, boiler or near the gas stove in the kitchen. The detector can be hung from the ceiling via a number of screws.
Maintenance and testing
Dust and dirt can reduce the operation of a carbon monoxide detector. It is therefore important to clean your detector every month with a slightly damp cloth and every six months with a vacuum cleaner. However, never use cleaning products and do not paint the detector. In addition, it is recommended to test the carbon monoxide detector on a monthly basis to ensure that it functions properly.
What’s in the box:
Carbon monoxide detector, battery, manual, mounting material
Carbon monoxide, a lethal intruder within your home
In winter time, people tend to cosy up on the couch with the heating on. Especially than, carbon monoxide is lurking around the corner. When the heating sources are not properly maintained, carbon monoxide can be released. Carbon monoxide is a lethal gas, which is not detectable with our senses. Therefore, it is of the upmost importance to have one or more alarms installed, to make sure you are warned in time.
Loud and clear alarm
The Smartwares RM380 Carbon monoxide alarm has a loud and clear alarm of 85 dB that goes off when the allowed carbon monoxide concentration is exceeded. The alarm can be used in spaces with a surface from 20 m² up to 40 m². The sensor has a 10 years lifetime and comes with batteries. You will hear a short beep if the battery is running low, this way you get alerted when you need to replace the battery.
Easy installation
The carbon monoxide detector functions optimally when it is suspended from the ceiling and at least 1.85 meters from a combustion device. An ideal place to hang the detector is for example near the boiler, boiler or near the gas stove in the kitchen. The detector can be hung from the ceiling via a number of screws.
Maintenance and testing
Dust and dirt can reduce the operation of a carbon monoxide detector. It is therefore important to clean your detector every month with a slightly damp cloth and every six months with a vacuum cleaner. However, never use cleaning products and do not paint the detector. In addition, it is recommended to test the carbon monoxide detector on a monthly basis to ensure that it functions properly.
What’s in the box:
Carbon monoxide detector, battery, manual, mounting material