0,00
(toimituskulut: 0,00)
BlueOptics SFP3131BU7.5MK, 7,5 m, G.657.A1, LC, LC, LC
Tuotenumero: [7301596] | Valmistaja: BLUEOPTICS | Mallinum: SFP3131BU7.5MK | EAN: 4063232617374
Toimitus ennen joulua
Tuotteet on tilattava viimeistään perjantai 13-12-2024 kl. 12.00 varmistaaksesi tuotteen saapumisen ennen 23.12. Saa tilata myös aikaisemmin - ennen kuin olemme kiireisiä :-)
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 4-5 arkipäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 25,10 |
EUR
16,95
ilman ALV 13,51
Kokonaishinta sis. toimitus
26,99
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Optimal Fiber Connections
BlueOptics© SFP3131BU7.5MK 7.5 Meter Fiber Optic Patch Cord with Duplex LC/UPC to LC/UPC connector and laser-optimizedsingle-mode fiber (SMF) in fiber category Single-mode G.657.A1 (fiber type E9/125µm), with Yellow color.
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords have a flame-retardant LSZH jacket. BlueOptics SFP3131BU7.5MK 7.5 Metermulti-mode Single-mode G.657.A1 LC-LC Duplex Fiber Optic Patch Cords are designed for the transmission of 1310nm / 1550nm signals and are suitable forthe connection with patch panel ports or of optical transceivers with each other for example.
Best Attenuation Values
BlueOptics SFP3131BU7.5MK 7.5 Meter multi-mode Single-mode G.657.A1 LC-LC Duplex Fiber Optic Patch Cords have an attenuation value of0.4 dB per kilometer, a low input loss and a high return loss. A Further optimization of the return loss by adjusting thepolish (UPC or 8° APC) is also possible. BlueOptics SFP3131BU7.5MK 7.5 Meter multi-mode Single-mode G.657.A1 LC-LC Duplex Fiber Optic Patch Cords areavailable in 0.5, 1, 2, 3, 5, 7.5, 10, 15, 20, 30 or 50 meter length. Custom lengths are also available on request.
Highest Quality Components
For lossless transmissions exclusively branded fibers from well-known manufacturers such as Corning,Fujikura or YOFC are used in the production process of BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Duplex Single-mode G.657.A1 Fiber Optic Patch Cords. Allinstalled connectors are manufactured by brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massariwith highly reliable BlueOptics Zirconia ceramic ferrule and achieve a lifetime of up to 1500 mating cycles.
Error-free Transmission
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords are tested after production withinterferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the inputloss and return loss values is included with every shipped LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cord.
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords meet the Telcordia Requirements GR-326-Core4.4.
Industrial Standards
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Duplex Single-mode G.657.A1 Fiber Optic Patch Cords are manufactured to meet generallyaccepted industry standards and norms and are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates avery low smoke emission in comparison to PVC coated patch cords. Furthermore no halogen is released.
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords meet the following Norms: IEC-61034,IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.
Act now!
By using BlueOptics Fiber Optic Patch Cords networks can be prepared for increasing demands. Regardlesswhether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higherreliability is desired. With BlueOptics Fiber Optic Patch Cords you can improve your connections and reduce your OPEX andCAPEX.
BlueOptics© SFP3131BU7.5MK 7.5 Meter Fiber Optic Patch Cord with Duplex LC/UPC to LC/UPC connector and laser-optimizedsingle-mode fiber (SMF) in fiber category Single-mode G.657.A1 (fiber type E9/125µm), with Yellow color.
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords have a flame-retardant LSZH jacket. BlueOptics SFP3131BU7.5MK 7.5 Metermulti-mode Single-mode G.657.A1 LC-LC Duplex Fiber Optic Patch Cords are designed for the transmission of 1310nm / 1550nm signals and are suitable forthe connection with patch panel ports or of optical transceivers with each other for example.
Best Attenuation Values
BlueOptics SFP3131BU7.5MK 7.5 Meter multi-mode Single-mode G.657.A1 LC-LC Duplex Fiber Optic Patch Cords have an attenuation value of0.4 dB per kilometer, a low input loss and a high return loss. A Further optimization of the return loss by adjusting thepolish (UPC or 8° APC) is also possible. BlueOptics SFP3131BU7.5MK 7.5 Meter multi-mode Single-mode G.657.A1 LC-LC Duplex Fiber Optic Patch Cords areavailable in 0.5, 1, 2, 3, 5, 7.5, 10, 15, 20, 30 or 50 meter length. Custom lengths are also available on request.
Highest Quality Components
For lossless transmissions exclusively branded fibers from well-known manufacturers such as Corning,Fujikura or YOFC are used in the production process of BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Duplex Single-mode G.657.A1 Fiber Optic Patch Cords. Allinstalled connectors are manufactured by brand manufacturers such as Amphenol, Diamond, Nissin Kasei or Reichle & De-Massariwith highly reliable BlueOptics Zirconia ceramic ferrule and achieve a lifetime of up to 1500 mating cycles.
Error-free Transmission
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords are tested after production withinterferometer and Optical-Time-Domain-Reflectometry (OTDR) to ensure the best quality. A measurement protocol of the inputloss and return loss values is included with every shipped LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cord.
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords meet the Telcordia Requirements GR-326-Core4.4.
Industrial Standards
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Duplex Single-mode G.657.A1 Fiber Optic Patch Cords are manufactured to meet generallyaccepted industry standards and norms and are equipped with a flame-retardant LSZH jacket. In case of a fire thus creates avery low smoke emission in comparison to PVC coated patch cords. Furthermore no halogen is released.
BlueOptics SFP3131BU7.5MK 7.5 Meter LC-LC Single-mode G.657.A1 Duplex Fiber Optic Patch Cords meet the following Norms: IEC-61034,IEC-754-1, IEC 60332-1, IEC 60332-3, IEC/EN 60950 and RoHS.
Act now!
By using BlueOptics Fiber Optic Patch Cords networks can be prepared for increasing demands. Regardlesswhether an increased data volume, higher transmission rates, greater scalability, higher performance and/or a higherreliability is desired. With BlueOptics Fiber Optic Patch Cords you can improve your connections and reduce your OPEX andCAPEX.