0,00
(toimituskulut: 0,00)
Digital Easy Fit Plug
Tuotenumero: [1626935] | Valmistaja: WITTMAX | EAN: 5010963585150
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-7 työpäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 25,10 |
EUR
35,30
ilman ALV 28,13
Kokonaishinta sis. toimitus
45,34
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
Digital Easy Fit Plug
Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!
Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout.
C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.
Features
The EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.
Each C8515 EasyFit Digital Plug can be transferred easily from one car to another.
There is no need for a soldering iron or modelling expertise.
Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!
Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout.
C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.
Features
The EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.
Each C8515 EasyFit Digital Plug can be transferred easily from one car to another.
There is no need for a soldering iron or modelling expertise.