0,00
(toimituskulut: 0,00)
Schwalbe 10430943, Presta-venttiili, 27.5"/28"/29", 50,8 - 60,96 mm, 4 cm, Musta, Saksa
Tuotenumero: [10601702] | Valmistaja: Schwalbe | Mallinum: 10430943 | EAN: 3606481360977
Etävarastossa
Tuotetta on etävarastossamme. Toimitusaika noin 4-5 arkipäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 25,10 |
EUR
14,23
ilman ALV 11,34
Kokonaishinta sis. toimitus
24,27
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
A bicycle tube is predominantly made of Butyl rubber. Butyl is a very elastic and airtight synthetic rubber. But as with the tire, other fillers are necessary to make up the rubber compound. The quality of a tube can vary significantly depending on the rubber compound. For instance Schwalbe tubes have extremely high air retention and elasticity. This high elasticity allows a wide range of different tire sizes to be covered.
There is a difference between heat molded and autoclave tubes. Vulcanizing in a mold improves the uniformity of wall thickness, thus reducing weight and improving air retention. For this reason the autoclave tubes which can be produced easier have become less common over the past years. Schwalbe tubes have always been made using the heat molding process.
Every tube also needs a valve, which is bonded to the tube during the vulcanizing process.Schwalbe 10430943. Valve type: Presta valve, Compatible wheel size: 27.5"/28"/29", Compatible tyre width range: 50.8 - 60.96 mm. Weight: 140 g. Package type: Box, Quantity per pack: 1 pc(s)
There is a difference between heat molded and autoclave tubes. Vulcanizing in a mold improves the uniformity of wall thickness, thus reducing weight and improving air retention. For this reason the autoclave tubes which can be produced easier have become less common over the past years. Schwalbe tubes have always been made using the heat molding process.
Every tube also needs a valve, which is bonded to the tube during the vulcanizing process.Schwalbe 10430943. Valve type: Presta valve, Compatible wheel size: 27.5"/28"/29", Compatible tyre width range: 50.8 - 60.96 mm. Weight: 140 g. Package type: Box, Quantity per pack: 1 pc(s)