BlueOptics SFP-3 yhteensopiva BlueOptics SFP BO05A13640D ( SFP-3-BO )

Superior PerformanceRAD SFP-3 compatible 100BASE-LH SFP Transceiver with LC Duplex connector according to MSA standards from the brand BlueOptics. The RAD SFP-3 compatible 100BASE-LH SFP has a receiver (with 1310nm) and a transmitter (with 1310nm) for the transfer of optical signals via Single-mode fiber, taking the respective transmission protocol into account. The RAD SFP-3 compatible 100BASE-LH SFP is suitable for the use in all major RAD hardware platforms (such as switches, routers, storage systems, load balancers, gauges, etc.) that officially support the original RAD SFP-3 100BASE-LH SFP. Each RAD SFP-3 compatible 100BASE-LH SFP supports Ethernet, Fibre Channel over Ethernet or SDH/SONET high-speed applications of up to 155Mbit per second on up to 40 Kilometer distance. Request a test sample now!Compatibility and QualityTo ensure 100% compatibility and functionality, all RAD SFP-3 compatible 100BASE-LH SFP are tested for the use in the respective RAD hardware while being adapted to the software requirements. Every RAD SFP-3 compatible 100BASE-LH SFP from the brand BlueOptics is manufactured according to the defined MSA standards, like the original RAD SFP-3 Transceiver and contains the same, if not even better, single components from well-known traditional companies for data communication technology, such as high-quality lasers (e.g from Avago or Lumentum) and qualitative ICs (e.g., Maxim Integrated, Netlogic, Mindspeed or Analog Devices). This preselection of the world's best components for optical Transceiver modules results in an over-average product lifetime of more than 10 years for all RAD SFP-3 compatible BlueOptics 100BASE-LH SFP. Ask for your BlueOptics sample now!Wide Range of ApplicationsRAD SFP-3 compatible 100BASE-LH SFP support all popular optical data transfer applications and are designed for the use in switches, routers, storage systems and other hardware solutions that support the original RAD SFP-3 100BASE-LH SFP as stated by the RAD data sheet. The RAD SFP-3 compatible BlueOptics 100BASE-LH SFP is an equivalent replacement for original RAD SFP-3 100BASE-LH SFP whose price has been artificially elevated to finance hardware such as switches. Therefore, from now on you should rely on RAD SFP-3 compatible 100BASE-LH SFP from the BlueOptics brand with the best price/performance ratio and convince yourself of their quality and functionality. The RAD SFP-3 compatible 100BASE-LH SFP support all popular applications and offer the same functionality as the original RAD SFP-3 100BASE-LH SFP. Try it out and contact us now!Data Transmission at the Speed of LightFiber optic connections for optical data transmissions are not susceptible to electromagnetic interference (EMI) and offer the possibility of a wide variety of bandwidth variations. With RAD SFP-3 compatible 100BASE-LH SFP of the BlueOptics brand, you can increase your bandwidth and reduce latencies with maximum availability without any loss. RAD SFP-3 compatible 100BASE-LH SFP have a LC Duplex connector and can send and receive signals simultaneously through optical laser transmission, each over one fiber. The optimal connection should take place via an appropriate BlueOptics fiber patch cord, for example onto a patch panel or directly to another RAD SFP-3 compatible 100BASE-LH SFP Transceiver. This results in the optimum range and quality of your fiber-optic link. Optimize your network now!Error Analysis with Digital DiagnosticsSimplify troubleshooting, maintenance, and monitoring in your network with the RAD SFP-3 compatible 100BASE-LH SFP through the Digital Diagnostics Monitoring (DDM) / Digital Optical Monitoring (DOM) interface. With the help of the digital diagnostic function, which complies with MSA SFF-8472, the RAD SFP-3 compatible 100BASE-LH SFP can deliver the following information in real time: Supply voltage, laser bias current, laser average output power, laser received input power and temperature. This feature of the RAD SFP-3-compatible 100BASE-LH SFP facilitates the remote maintenance of optical transmission links. Please ensure that the DDM / DOM function is supported by the hardware in which the RAD SFP-3 compatible 100BASE-LH SFP is used, to access these features. Try it and start using BlueOptics products now!Maximum AvailabilityLess maintenance due to a long lifetime. RAD SFP-3 compatible 100BASE-LH SFP of the brand BlueOptics are using components from leading manufacturers for communication technology only, such as Lasers (like Lumentum or Avago) and Integrated Circuits (including Maxim Integrated, Netlogic, Mindspeed or Analog Devices). For this reason, RAD SFP-3 compatible 100BASE-LH SFP are designed for above average high operating times of over 1.000.000 MTBF hours. This corresponds to an average life span of 10 years and allows you to set up your network for the future. All RAD SFP-3 compatible 100BASE-LH SFP provide high availability and reduce the likelihood of a failure of important optical data links in high-speed network systems to an absolute minimum. Benefit from BlueOptics Transceivers now!BlueOptics SFP-3-BO. SFP transceiver type: Fiber optic, Maximum data transfer rate: 155 Mbit/s, Interface type: SFP. Product colour: Silver, Housing material: Metal. Input voltage: 3.3 V. Weight: 20 g. Number of products included: 1 pc(s), Package weight: 30 g