0,00
(toimituskulut: 0,00)
Walimex - Seinä-/kattokiinnitys - maksimikuorma: 6 kg
Tuotenumero: [959635] | Valmistaja: Walimex | Mallinum: 16444 | EAN: 4250234564441
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 7-9 työpäivää. Lisätietoja
Kuljetus 10,04 - Budbee - Laatikko - Valitse itse mikä laatikko.
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | 10,04 |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 25,10 |
EUR
50,83
ilman ALV 40,50
Kokonaishinta sis. toimitus
60,87
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
- Stand for the usage on ceiling or wall
- extandable from approx. 34 to 54cm
- ideal for limited spaces, e.g. small studios or passport corners
- especially suitable: 5/8 spigot variably (on top and on the side) usable
- load capacity up to max. 6kg
All good things come from above! The same with the Wall/Ceiling Stand from walimex. It is very sturdy and stable in the usage with studio lights and flash devices up to approx. 6kg. The 2cm thick rod can be extended between 34 and 54cm and can therewith be used flexibly due to your requirements. A special feature is certainly the 5/8 spigot with 1/4 and 3/8 inch thread. It can be attached either on the top of the tripod or at the side.
The brilliant combination between performance, stability and flexibility predestine the Stand for the use in your studio as additional light attachment without disturbing tripod legs. Just everywhere, where the spaces are limited, the Wall/Ceiling Stand should not be missed.
- extandable from approx. 34 to 54cm
- ideal for limited spaces, e.g. small studios or passport corners
- especially suitable: 5/8 spigot variably (on top and on the side) usable
- load capacity up to max. 6kg
All good things come from above! The same with the Wall/Ceiling Stand from walimex. It is very sturdy and stable in the usage with studio lights and flash devices up to approx. 6kg. The 2cm thick rod can be extended between 34 and 54cm and can therewith be used flexibly due to your requirements. A special feature is certainly the 5/8 spigot with 1/4 and 3/8 inch thread. It can be attached either on the top of the tripod or at the side.
The brilliant combination between performance, stability and flexibility predestine the Stand for the use in your studio as additional light attachment without disturbing tripod legs. Just everywhere, where the spaces are limited, the Wall/Ceiling Stand should not be missed.