0,00
(toimituskulut: 0,00)
ICY BOX IB-127CL-U3 - Kiinteän tilan/kiintolevyn järjestelmä - 2 lokeroa (SATA-600) - USB 3.2 Gen 1 (ulkoinen)
Tuotenumero: [8070929] | Valmistaja: RaidSonic Technology | Mallinum: IB-127CL-U3 | EAN: 4250078171591
Etävarastossa
Tuotetta on etävarastossamme, toimitusaika noin 5-7 työpäivää. Lisätietoja
Ilmainen toimitus Budbee - Box - Valitse itse mikä laatikko
Toimituskulut on laskettu vastaanottajan postinumeron perusteella: - Vaihda postinumero
Syötä postinumero toimitusta varten:
Katso kuljetusvaihtoehdot
| Budbee Laatikko - Nouda valitsemastasi laatikosta! | Gratis |
| Bring - Toimitus huoltopisteeseen | 10,04 |
| Bring - Kotiinkuljetus -arkisin. | 25,10 |
EUR
68,67
ilman ALV 54,72
Kokonaishinta sis. toimitus
68,67
Tämä toiminto vaatii sisäänkirjautumisen. Luo käyttäjä ja voit käyttää listojamme esim. säännöllisiä ostoksia ja toivelistoja varten
Luo käyttäjä
Kirjaudu
Luo käyttäjä
Kirjaudu
Send på mail
The IB-127CL-U3 docking and clone station combines performance and modern design like no other. USB 3.2 (Gen 1) with 5 Gbit/s and UASP support paired with a new and fresh RGB design. So the docking and clone station also cuts a fine figure visually. Clone bootable SSDs or HDDs easily and quickly at the touch of a button without using a PC (stand alone) or use both bays in SINGLE mode to operate two drives independently.
Cloning bootable hard disks
Hard drives are simply plugged into the docking and clone station. Just one touch on the clone button, which is easily accessible on the device, and the cloning process starts without the need for a USB 3.0 connection to the computer. The hard disk is now cloned 1:1, bit by bit.
All easy
With the help of HotSwap and Plug & Play, hard disks of the form factors 2.5" (max. height up to 15 mm) and 3.5" can be easily inserted, exchanged and put into operation. When the docking and clone station is connected to the PC, both hard disks are recognised independently of each other.
RGB ambience
The bottom of the clone station lights up during operation and provides an atmospheric highlight while working. The aluminium housing in matt black provides a stylish contrast of the highest quality. The LED display for the cloning progress is embedded on the top of the device. Simple and exciting.
Cloning bootable hard disks
Hard drives are simply plugged into the docking and clone station. Just one touch on the clone button, which is easily accessible on the device, and the cloning process starts without the need for a USB 3.0 connection to the computer. The hard disk is now cloned 1:1, bit by bit.
All easy
With the help of HotSwap and Plug & Play, hard disks of the form factors 2.5" (max. height up to 15 mm) and 3.5" can be easily inserted, exchanged and put into operation. When the docking and clone station is connected to the PC, both hard disks are recognised independently of each other.
RGB ambience
The bottom of the clone station lights up during operation and provides an atmospheric highlight while working. The aluminium housing in matt black provides a stylish contrast of the highest quality. The LED display for the cloning progress is embedded on the top of the device. Simple and exciting.