Shelly Qubino Wave Pro 2, puolijohderele, harmaa, 25 mW, 40 m, 2 kanavaa, 0 - 40 m

Professional 2-channel DIN rail Z-Wave® smart switch with dry contacts​
Suitable for home and facility automation with remote control. DIN rail mountable inside a breaker box. Enhanced safety features.​

The best solution for new home buildings and business facilities​​
Wave Pro 2 is a two-phase, 2-channel relay supporting up to 25 A for professional lights and appliance automation for residential or commercial use. It is equipped with potential-free outputs (dry contacts), offering high flexibility in voltage support and applications. Different types of actions, scenarios, and schedules can be set to sync your environment to your daily activities or business needs.

Shelly Qubino works on Z-Wave
By using Z-Wave, smart home products can seamlessly communicate with each other, regardless of their brand or platform, thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800), one of the most popular standardized technologies for smart homes in the world.

Works with any Z-Wave gateway
Wave Pro Series is designed to be installed on the DIN-rail inside the breaker box. Once installed, include the device in your Z-Wave network (Z-Wave gateway is required) and control connected appliances from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateways.

Z-Wave operated
Include Wave Pro 1 to your Z-Wave network and control it remotely. It‘s compatible with all certified Z-Wave gateways.

2 outputs, 16 A each​​​
It has a total device output of 25 A.​

Dry contacts​
Supporting low and high voltages, this device enables you to control a wide range of AC devices and appliances.​

DIN-mountable ​
Intended to be installed inside the breaker box and designed to meet the global DIN rail standardization.​

Associations ​​
Establish direct communication between devices in your Z-Wave local network and set actions with no hub present! ​

The highest level of security​
Include the device as Security 2 Authenticated for encrypted communication and utmost safety of your Z-Wave network.​

Control lights on 2 phases​​
Automate the lights and optimize their energy consumption through smart schedules, timers, scenarios, etc. Wave Pro 2 allows you to control the lights on 2 phases and manage them separately by setting custom schedules and smart timers. Set the lights on the operational floors to switch off completely after the working day is over and switch back on only where it is necessary at 7:00 in the morning. This way, you will not have to worry about any forgotten lights or efficiency.​

Automate your valves
Use Wave Pro 2 to control the motorized valves in your water distribution box and control heating, cooling, or any other motorized valve in your facility. This way, you can protect your premises from flooding and make your spending more efficient by setting the schedules, scenes, or associations. Smart schedules combined with Z-Wave temperature & humidity sensors* will provide dynamic control of the heating system for an optimal indoor climate.​

Sockets automation for efficient energy usage​
Make sure that no energy goes to waste by automating the sockets' power supply with Wave Pro 2 and use the smart scheduling to cut off the power to all non-essential heavy consuming electrical appliances in offices between 7:00 PM and 7:00 AM during the weekdays and over the weekend. That way, you will cut the energy consumption of these devices in half, which will result in significant optimization of the monthly energy cost. ​

Wave Pro Series​
Enhanced with temperature, overpower, and overvoltage* load protection, Wave Pro series is designed to be installed inside the breaker box (DIN). Allowing full smart automation with no additional cables or wiring, Pro line is perfect for homes, offices, stores, business, and manufacturing facilities, as well as new buildings.​

Overheating protection
In case of unsafe temperature levels or rapid temperature increase, device switches off the outputs and sends notification.
Shelly Qubino Wave Pro 2. Product type: Solid-state relay, Product colour: Grey, Transmit power: 25 mW. Power consumption (typical): 0.3 W, Maximum current: 25 A, AC input voltage: 110 - 240 V. Dimensions (WxDxH): 94 x 19 x 69 mm, Weight: 73 g